Configuring internet access on a 192.168.31.1 router is straightforward, but it can be challenging for users without networking knowledge. This guide provides step-by-step instructions for setting up your router.
-
Log into the Settings Interface: Open your browser and enter 192.168.31.1, then press Enter -> Click 'Agree' and 'Continue' to access the settings page. Note: If this router has been previously set up, you will need to enter the management password created earlier to log in or reset it to factory settings before proceeding with setup.
-
Set Up Internet Connection: Fill in your broadband account under 'Username' and your broadband password under 'Password', then click 'Next'. Important Notes: (1) Your broadband account and password are provided by your ISP; they must be entered correctly for internet access. (2) If you've forgotten these details or are unsure of their accuracy, contact your ISP for verification. (3) If no username/password is required for dialing in, you'll automatically proceed to Step 3.
-
Configure WiFi Name and Password: Customize your ‘WiFi Name’ and ‘WiFi Password’, then click ‘Next’.
-
Set Management Password: You can customize the ‘Management Password’ here -> Click ‘Configuration Complete’. Alternatively, check the box that says “Same as WiFi Password” – it's recommended to do so -> Then click ‘Configuration Complete’. Important Note: Remember any separate management password you set; you'll need it later to log back into the router's settings interface.
-
Initialization Configuration: The system will automatically configure itself now.
-
Configuration Completed: Your configuration of the 192.168.31.l router is complete!